Rail Whip: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| Line 42: | Line 42: | ||
</gallery> | </gallery> | ||
==Video== | ==Video== | ||
Trick tip video by [[Mike Osterman]].<br> | |||
<youtube>https://www.youtube.com/watch?v=SCIafwwub4E</youtube> | <youtube>https://www.youtube.com/watch?v=SCIafwwub4E</youtube> | ||
<!--==References== | <!--==References== | ||
<references/>--> | <references/>--> | ||
Revision as of 00:39, 28 August 2017
 | |
| Short Hand | Rail Whip |
|---|---|
| Difficulty Level |
Intermediate |
A Rail Whip is a fun Rail Trick where you balance on one wheel with the ball of your foot and kick the board with your other foot to spin the board 360 degrees around the axis of your balancing foot and catching the board in the same rail position you started from. Most skaters kick the board backward but you can also kick it forwards like Denham Hill does.
Here are a few tips:
- If you aren't already, use offset wheels for the most stable platform possible.
- Use Axle Washers to bring the wheel out flush with the rail. This will help reduce the downward pressure and friction on the rail. (See picture below)
- Do this trick on a smooth surface to reduce friction. The smoother the surface, the less effort required to spin the board.
- Use a deck with a Lindgren cutout design like the Moonshine Skateboards Tony Gale Pro Model Deck or Decomposed Hans HAZZE Lindgren Original Crowbar Deck. Again, there will be reduced friction with less wood scraping against the ground.
- Sand or file out a wheel well to help prevent your toes from binding up against the board during the rotation. Witter Cheng does this on his setups. (See picture below)
-
Wheel flush with rail for reduced friction.
-
Custom wheel well on one of Witter's Decomposed Witter Cheng Vampire Fairy Deck.
-
Different angle of the wheel well.
-
Original Schmitt Stix Hans Lindgren Crow Bar Deck, circa 1986
.jpg)
.jpg)
Video
Trick tip video by Mike Osterman.